Need a way to mount CPU fans on a rimless aquarium
-
- Rising Star of AquaPetZ!
- Posts: 189
- Joined: Tue Jun 24, 2014 6:56 pm
- Location: Brampton, Canada
Need a way to mount CPU fans on a rimless aquarium
As the heading says, I need a way to mount the fans on my rimless tank.
Right now I have them placed in a very fragile way, with one edge of the fan over the tank glass and other on top my finnex fixture. This essentially constrains my led fixture placement since I can't move the led fixture in the middle of the tank, where ideally it should be.
Any brethren did a diy before? Pics would strongly help.
Right now I have them placed in a very fragile way, with one edge of the fan over the tank glass and other on top my finnex fixture. This essentially constrains my led fixture placement since I can't move the led fixture in the middle of the tank, where ideally it should be.
Any brethren did a diy before? Pics would strongly help.
30x18x18 Tank | ADA Amazonia | EHEIM Classic 2217 | Finnex RAY2 LED | EHEIM Jager | Pressurized CO2
Learning to sustain...
Learning to sustain...
- saikumar
- Aspiring Star of AquapetZ!
- Posts: 974
- Joined: Sat Nov 17, 2012 7:44 am
- Location: Secunderabad(far from REZ)
Re: Need a way to mount CPU fans on a rimless aquarium
How is it currently mounted, in a picture please.
Nearly everyone goes for a rimless these days, so we should help.
Nearly everyone goes for a rimless these days, so we should help.
-
- Rising Star of AquaPetZ!
- Posts: 189
- Joined: Tue Jun 24, 2014 6:56 pm
- Location: Brampton, Canada
Re: Need a way to mount CPU fans on a rimless aquarium
Here is how the fans are mounted currently. Note that the light fixture is at about 30% of the depth of the tank.
30x18x18 Tank | ADA Amazonia | EHEIM Classic 2217 | Finnex RAY2 LED | EHEIM Jager | Pressurized CO2
Learning to sustain...
Learning to sustain...
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Need a way to mount CPU fans on a rimless aquarium
I made a hanger to hold fans over tank. Will display photograph in evening.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
- vikramdutta11
- Rising Star of AquaPetZ!
- Posts: 341
- Joined: Thu Jun 25, 2015 5:05 pm
- Location: Kolkata
Re: Need a way to mount CPU fans on a rimless aquarium
you can use synthetic board used for advertising purpose, it has a name but I am forgetting the name.vasishta.sushant wrote:As the heading says, I need a way to mount the fans on my rimless tank.
Right now I have them placed in a very fragile way, with one edge of the fan over the tank glass and other on top my finnex fixture. This essentially constrains my led fixture placement since I can't move the led fixture in the middle of the tank, where ideally it should be.
Any brethren did a diy before? Pics would strongly help.
- rajivzee
- Rising Star of AquaPetZ!
- Posts: 285
- Joined: Mon Jun 17, 2013 7:59 pm
- Location: New Delhi
Re: Need a way to mount CPU fans on a rimless aquarium
One option is to take an acralic sheet get hole drilled out to fix your fans and follow similar design principle as your led light to put it over tank.
I've made fan holder for myself with acralic sheet but I don't have side stand as I don't need them
I've made fan holder for myself with acralic sheet but I don't have side stand as I don't need them
Thanks & Regards
Rajiv Anand
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.” ― Mark Twain
Rajiv Anand
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.” ― Mark Twain
-
- Rising Star of AquaPetZ!
- Posts: 189
- Joined: Tue Jun 24, 2014 6:56 pm
- Location: Brampton, Canada
Re: Need a way to mount CPU fans on a rimless aquarium
I am not sure where to get the acrylic sheet from and how to bend them. While I am sure I can do that but I need information around the resources.
30x18x18 Tank | ADA Amazonia | EHEIM Classic 2217 | Finnex RAY2 LED | EHEIM Jager | Pressurized CO2
Learning to sustain...
Learning to sustain...
- rajivzee
- Rising Star of AquaPetZ!
- Posts: 285
- Joined: Mon Jun 17, 2013 7:59 pm
- Location: New Delhi
Re: Need a way to mount CPU fans on a rimless aquarium
You can get glue & acrylic sheet from Paharganj, there are people who make boxes or picture frame, etc. May be they can help you with your custom requirement.
See following video,
How to glue
https://www.youtube.com/watch?v=hT6Ow_cBTps
How to bend
https://www.youtube.com/watch?v=Y5Za7N87qI4
Another option:
Double sided flexi clamp
http://www.amazon.co.uk/Daylight-D51010 ... B002YMVJJ8
But I don't where to get this locally..
or may be you can use flexi car mobile holder?
See following video,
How to glue
https://www.youtube.com/watch?v=hT6Ow_cBTps
How to bend
https://www.youtube.com/watch?v=Y5Za7N87qI4
Another option:
Double sided flexi clamp
http://www.amazon.co.uk/Daylight-D51010 ... B002YMVJJ8
But I don't where to get this locally..
or may be you can use flexi car mobile holder?
Thanks & Regards
Rajiv Anand
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.” ― Mark Twain
Rajiv Anand
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.” ― Mark Twain
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Need a way to mount CPU fans on a rimless aquarium
You can get Acrylic sheets from Pahar Ganj, opposite Shila Cinema hall.vasishta.sushant wrote:I am not sure where to get the acrylic sheet from and how to bend them. While I am sure I can do that but I need information around the resources.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Rising Star of AquaPetZ!
- Posts: 189
- Joined: Tue Jun 24, 2014 6:56 pm
- Location: Brampton, Canada
Re: RE: Re: Need a way to mount CPU fans on a rimless aquarium
Rajeev ji, show some pics of your arrangement please.SCORPIO wrote:You can get Acrylic sheets from Pahar Ganj, opposite Shila Cinema hall.vasishta.sushant wrote:I am not sure where to get the acrylic sheet from and how to bend them. While I am sure I can do that but I need information around the resources.
My shrimp tank isnt in the AC room and there is no fan on top of it. The water is around 30 degree in that tank. Although it's cycling right now, I am worried for the future. Really need to get some cooling arrangement in place.
Sent from my SM-N910G using Tapatalk
30x18x18 Tank | ADA Amazonia | EHEIM Classic 2217 | Finnex RAY2 LED | EHEIM Jager | Pressurized CO2
Learning to sustain...
Learning to sustain...