Eheim Filter 2217 setup
- slowpoison
- New Star of AquaPetZ!
- Posts: 88
- Joined: Mon Dec 09, 2013 2:06 am
- Location: Kolkata
Eheim Filter 2217 setup
I recently got my first eheim canister filter. But I am completely confused with the setup. I went through a few articles on the web and on youtube, but i am confused even more. Every article says you need to cut some of the inlet, outlet, return tubing off??? I was hoping if anybody can provide me with some pictorial description of the various stages of the set up, would be very helpful for me.
Last edited by slowpoison on Thu Jan 02, 2014 8:38 pm, edited 1 time in total.
Regards,
Arijit
Arijit
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Eheim 2217 setup
My dear, please introduce yourself in "Self Introduction" and update your location.
Cutting the inlet, outlet and tube means converting those according to the requirement.
Please see this
Cutting the inlet, outlet and tube means converting those according to the requirement.
Please see this
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
- slowpoison
- New Star of AquaPetZ!
- Posts: 88
- Joined: Mon Dec 09, 2013 2:06 am
- Location: Kolkata
Re: Eheim 2217 setup
I had been through this video before. He took the vid after the setup and does not explain in-depth. Also certain areas are dark where you cannot see, like his prev video.
But thanks rajiv nonetheless.
But thanks rajiv nonetheless.
Regards,
Arijit
Arijit
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Eheim 2217 setup
Which problem are you facing? Let us know step by step.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Rising Star of AquaPetZ!
- Posts: 469
- Joined: Thu Nov 10, 2011 5:03 pm
Re: Eheim 2217 setup
slowpoison, you got two control valve with your pack of Eheim filter, one for inlet and other one for outlet? you have to connect them with the outlet and inlet of your conister so you need two small pieces of both pipes.
Ashok
Ashok
Ashok
- slowpoison
- New Star of AquaPetZ!
- Posts: 88
- Joined: Mon Dec 09, 2013 2:06 am
- Location: Kolkata
Re: Eheim 2217 setup
Well I didn't want to start off in this forum by proving myself a complete idiot, but... lets start from the beginning. there are 2 tubes(im sorry, but I guess you be as frustrated answering my questions as I would asking them), the 16 mm and 22 mm. Which goes into the tank and which out of?SCORPIO wrote:Which problem are you facing? Let us know step by step.
I understand you need to cut, but is that absolutely necessary? Since I feel the answer would be a yes, then where do you attach the 2 cut sections? Does the 2 double tap connectors fit in towards the can end or towards the tank? is that for both the inlet and outlet, or one. If one, which one? Or do the connectors come of and you fit one part of each towards the can end and the other towards the tank end? I guess all these would much easier if I had a diagrammatic set-by-step guide like you find in those DIY co2 setups and stuff.
P.S. Sorry if you feel hot under your collar.
Regards,
Arijit
Arijit
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Eheim 2217 setup
Arijit, we never frustrates in answering in newer hobbyists. You are always welcome here with the bombardment of your questions.
Please read here http://www.fishlore.com/fishforum/filte ... ricks.html
Please read here http://www.fishlore.com/fishforum/filte ... ricks.html
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
- aamir
- Experts
- Posts: 884
- Joined: Thu Oct 06, 2011 7:25 pm
- Location: Sec-24,Rohini,Delhi
- Contact:
Re: Eheim 2217 setup
There are many ways you can setup your filter here i am going to show how i did it for myself
first thing first you have to make sure you have every thing
thing inside the plastic bag
first cut a small piece of tubing from the thicker tube or 22 one
then attach it to the valves
then attach the whole piece to the input of your filter
it should look like this
first thing first you have to make sure you have every thing
thing inside the plastic bag
first cut a small piece of tubing from the thicker tube or 22 one
then attach it to the valves
then attach the whole piece to the input of your filter
it should look like this
Fb....(aamir.khan.180072@facebook.com)
New number 9560682201
New number 9560682201
- aamir
- Experts
- Posts: 884
- Joined: Thu Oct 06, 2011 7:25 pm
- Location: Sec-24,Rohini,Delhi
- Contact:
Re: Eheim 2217 setup
then repeat the same with the smaller tubing
then attach it to the outlet of you filter
now attach the other half of the tubing to there valves
then attach it to the outlet of you filter
now attach the other half of the tubing to there valves
Fb....(aamir.khan.180072@facebook.com)
New number 9560682201
New number 9560682201
- aamir
- Experts
- Posts: 884
- Joined: Thu Oct 06, 2011 7:25 pm
- Location: Sec-24,Rohini,Delhi
- Contact:
Re: Eheim 2217 setup
Fb....(aamir.khan.180072@facebook.com)
New number 9560682201
New number 9560682201