Twinstar Algae Inhibitor
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Twinstar Algae Inhibitor
Today I will try to do this.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Rising Star of AquaPetZ!
- Posts: 497
- Joined: Sat Aug 18, 2012 3:40 pm
- Location: Mumbai, India
Re: Twinstar Algae Inhibitor
Rajiv, please share once you have tried your on it.
Amit Naik
[background=][/background]
-
- Rising Star of AquaPetZ!
- Posts: 497
- Joined: Sat Aug 18, 2012 3:40 pm
- Location: Mumbai, India
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Twinstar Algae Inhibitor
Super busy upto 27th January. After that I will try.aawnaik wrote:Rajivji, any progress?
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Rising Star of AquaPetZ!
- Posts: 497
- Joined: Sat Aug 18, 2012 3:40 pm
- Location: Mumbai, India
Re: Twinstar Algae Inhibitor
Yesterday, I made DIY Twinstar Algae Inhibitor. The materal used is as under -
1. Aluminum Wire Mesh
2. Teflon Tape winder
3. Mobile Charger for power
1. Aluminum Wire Mesh
2. Teflon Tape winder
3. Mobile Charger for power
You do not have the required permissions to view the files attached to this post.
Amit Naik
[background=][/background]
- saikumar
- Aspiring Star of AquapetZ!
- Posts: 974
- Joined: Sat Nov 17, 2012 7:44 am
- Location: Secunderabad(far from REZ)
Re: Twinstar Algae Inhibitor
Great stuff sir!
Do you have assembly pics step by step?
Do you have assembly pics step by step?
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Twinstar Algae Inhibitor
+1saikumar wrote:Great stuff sir!
Do you have assembly pics step by step?
I also want step by step photographs.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Rising Star of AquaPetZ!
- Posts: 497
- Joined: Sat Aug 18, 2012 3:40 pm
- Location: Mumbai, India
Re: Twinstar Algae Inhibitor
Ups! That's a difficult job. Don't have pics but will try to explain.
Amit Naik
[background=][/background]
-
- Rising Star of AquaPetZ!
- Posts: 497
- Joined: Sat Aug 18, 2012 3:40 pm
- Location: Mumbai, India
Re: Twinstar Algae Inhibitor
here is the process I followed -
1. Teflon Tape Winder -
The wheel on which the tape is wound was cut to make 2 plastic disks. The inside diameter of the 2 disks was increased by cutting it with scissor.
2. Aluminum wire mesh was cut in round shape to match the size of the 2 disks (2 pieces of alumimum wire mesh disk) connected the electrical wire with the help of soldering rold. Two ends of wire to 2 pieces of wiremesh.
3. Now the challegne was to avoid the contact between the 2 wire mesh disks, so found out as old tennis racket (plastic) of my kids and cut the inside plastic squares so as to wor as a seperator beteen the 2 wire mesh disks.
4. The outer ring of the Teflon Tape Plastic was used to fix the parts as under -
a. made a whole in the out ring to insert the electric wire
b. bottom layer plastic disc
c. on top of it wiremesh disk
d. plastic squares cut from the racket on top of wire mesh
e. 2nd piece of wire mesh
f. covered it with the 2nd plastic disk
g. made another whole in the outer ring to fix sucker
h. connected the wires to 12 volt mobile charger
Thats all. It took about an hour to do all this and the cost is about RS. 150 (120 for charger & 30 for wire mesh).
Lets see the results. The equipment is costing 5500 on one of the onlie sites in India.
1. Teflon Tape Winder -
The wheel on which the tape is wound was cut to make 2 plastic disks. The inside diameter of the 2 disks was increased by cutting it with scissor.
2. Aluminum wire mesh was cut in round shape to match the size of the 2 disks (2 pieces of alumimum wire mesh disk) connected the electrical wire with the help of soldering rold. Two ends of wire to 2 pieces of wiremesh.
3. Now the challegne was to avoid the contact between the 2 wire mesh disks, so found out as old tennis racket (plastic) of my kids and cut the inside plastic squares so as to wor as a seperator beteen the 2 wire mesh disks.
4. The outer ring of the Teflon Tape Plastic was used to fix the parts as under -
a. made a whole in the out ring to insert the electric wire
b. bottom layer plastic disc
c. on top of it wiremesh disk
d. plastic squares cut from the racket on top of wire mesh
e. 2nd piece of wire mesh
f. covered it with the 2nd plastic disk
g. made another whole in the outer ring to fix sucker
h. connected the wires to 12 volt mobile charger
Thats all. It took about an hour to do all this and the cost is about RS. 150 (120 for charger & 30 for wire mesh).
Lets see the results. The equipment is costing 5500 on one of the onlie sites in India.
Amit Naik
[background=][/background]
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Twinstar Algae Inhibitor
Great explanation. I would follow the procedure.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda