Need help to convert existing lights to wifi on/off light.
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Need help to convert existing lights to wifi on/off light.
I want to convert all of my existing aquarium lights into wifi controlled on/off system. Need help and expert advice. I have basic knowledge of electronics.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
- sushant
- Moderator
- Posts: 2888
- Joined: Fri Oct 07, 2011 12:36 am
- Location: Faridabad, Haryana
- Contact:
Re: RE: Need help to convert existing lights to wifi on/off light.
It doesn't make much of a sense converting lights to WI-Fi control just for the sake switching it on or off(IMO our timer perform better).SCORPIO wrote:I want to convert all of my existing aquarium lights into wifi controlled on/off system. Need help and expert advice. I have basic knowledge of electronics.
You can make a controller or buy it off the shelf to control almost all the funtions.
Sent from my ASUS_Z00ED using Tapatalk
Sushant
-
- Rising Star of AquaPetZ!
- Posts: 527
- Joined: Sat Oct 08, 2011 11:01 am
Re: Need help to convert existing lights to wifi on/off light.
You need an Arduino, a Wifi shield,some relay boards ,programming skills, an Arduino app for your smartphone and a 5V charger.
Use the Frontier timers, they are easier to implement.
If you really want to go the microcontroller way, use it to control temperature, lights and CO2. Its a longer project but worth the effort.
Use the Frontier timers, they are easier to implement.
If you really want to go the microcontroller way, use it to control temperature, lights and CO2. Its a longer project but worth the effort.
- sushant
- Moderator
- Posts: 2888
- Joined: Fri Oct 07, 2011 12:36 am
- Location: Faridabad, Haryana
- Contact:
Re: RE: Re: Need help to convert existing lights to wifi on/off light.
this is why I said for on-off control timers are the best/easiest.apuda2010 wrote:You need an Arduino, a Wifi shield,some relay boards ,programming skills, an Arduino app for your smartphone and a 5V charger.
Use the Frontier timers, they are easier to implement.
If you really want to go the microcontroller way, use it to control temperature, lights and CO2. Its a longer project but worth the effort.
Secondly in case you go with DIY you might end up spending more on building a controller than what you spend on off the shelf solutions.
Sent from my ASUS_Z00ED using Tapatalk
Sushant
- SCORPIO
- Site Admin
- Posts: 10376
- Joined: Tue Oct 04, 2011 11:01 am
- Location: Delhi, India
- Contact:
Re: Need help to convert existing lights to wifi on/off light.
Everything is going over my head so timer is good option for me.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”
...................Swami Vivekananda
...................Swami Vivekananda
-
- Aspiring Star of AquapetZ!
- Posts: 1156
- Joined: Tue Oct 11, 2011 4:27 pm
- Location: New Delhi
Re: Need help to convert existing lights to wifi on/off light.
Timer is easiest option
- vikramdutta11
- Rising Star of AquaPetZ!
- Posts: 341
- Joined: Thu Jun 25, 2015 5:05 pm
- Location: Kolkata
Re: Need help to convert existing lights to wifi on/off light.
Very good decisionSCORPIO wrote: Everything is going over my head so timer is good option for me.
-
- New Star of AquaPetZ!
- Posts: 6
- Joined: Fri Apr 14, 2017 12:57 am
Re: Need help to convert existing lights to wifi on/off light.
There are two options here depending on your budget.
Option 1: Costlier, maybe easier and more flexible in options, Raspberry Pi3 + Relay Board
Option 2: Cheaper, less easy and less flexible in options, ESP8266 NodeMCU + Relay Board
For both options you will also need a RTC aka Real Time Clock. This ensures that the devices do not lose time when power goes off.
Timer is simple but less flexible. Say you want to switch on your CO2 few hours before lights are switched on, you will need a separate timer for CO2 solenoid.
I'm planning to build a Aquarium control system using Option 2. Already ordered the parts. For others who want to have a go at it, the following link will help you get started: http://randomnerdtutorials.com/esp8266-controlled-with-android-app-mit-app-inventor/
Option 1: Costlier, maybe easier and more flexible in options, Raspberry Pi3 + Relay Board
Option 2: Cheaper, less easy and less flexible in options, ESP8266 NodeMCU + Relay Board
For both options you will also need a RTC aka Real Time Clock. This ensures that the devices do not lose time when power goes off.
Timer is simple but less flexible. Say you want to switch on your CO2 few hours before lights are switched on, you will need a separate timer for CO2 solenoid.
I'm planning to build a Aquarium control system using Option 2. Already ordered the parts. For others who want to have a go at it, the following link will help you get started: http://randomnerdtutorials.com/esp8266-controlled-with-android-app-mit-app-inventor/